Clean your Magnetic Signs on a regular basis at least once a week with warm soapy water,
do not use abrasives or fluids like petrol.

Ensure the reverse of the Magnetic Sign and your vehicle are clean, dry and free from
grit before attaching. It is best to apply a wax polish the area your signs are positioned on a regular basis.

Once on the vehicle make sure the Magnetic Signs sit flat with no bumps that will allow air to flow
between the magnetic signs and the vehicle.

Do not apply the magnetic signs over sharp creases or mouldings.

If your Magnetic Signs are placed in the wrong position, completely remove the sign and realign.
Do not pull on the magnetic sign to realign when it is against the surface, as the material may scratch due to
resistance caused by the high magnetic strength.

Store your Magnetic Signs flat when possible, or roll them around the cardboard tube they
were supplied with, please keep the vinyl lettering to the outside when rolling.

When storing it is best to keep at room temperature as this keeps the material supple and will sit flatter
when re-fitted to your vehicle.

Home

Back